Scalamobil: Standard Installation |
Climb stairs in your own wheelchair!
Scalamobil shown attached to
pediatric wheelchair with
e.motion wheels attached |
 |
 |
Most manual
wheelchairs can accommodate the Scalamobil. A simple bracket installation
is all that is required! Wheelchairs must meet the following
criteria*: |
- Seat width of wheelchair must be be between 11" and 23" wide. Seat to floor height must be at least 16".
- Rear wheels must be quick release
style. (We can covert in most cases.)
- Area under seat must be free of devices
such as ventilators, oxygen tanks, etc.
|
|
|
|
|
| |
|
|
| *If your wheelchair does not
meet these requirements, please go to Transfer Systems for information on alternative ways to
use the Scalamobil. |
| |
|
|
|
| |
|
|
Using the Scalamobil is fast
and easy!
-
Roll the Scalamobil under the wheelchair seat and fasten to the brackets using the quick release pins.
-
Using the Scalamobil, slightly lift the wheelchair up and remove the rear wheels.
-
Position the wheelchair at the steps and you are ready to climb!
|
|
After replacing the rear wheels, the wheelchair can still be pushed with the Scalamobil attached.
|
|
 |
|
|
|
|
MORE INFO
Standard Installation
|
